FC/APC-FC/APC | Single Mode G657.A2 Duplex Patch Cord | 2.0x4.1mm

MLUDPCFA-SM

Home Page Other Products Other FC/APC-FC/APC | Single Mode G657.A2 Duplex Patch Cord | 2.0x4.1mm

FC/APC-FC/APC | Single Mode G657.A2 Duplex Patch Cord | 2.0x4.1mm


FC type connectors have 2.5 mm diameter ferule structure. The abbreviations PC, UPC and APC are definitions expressing the physical differences of the surface geometries of the connectors on the ceramic ferrules. UPC (Ultra Physical Contact) indicates that the ceramic ferule structure on the connector has an extra polished flat structure; APC (Angled Physical Contact) indicates that the ceramic ferrule structure on the connector has an extra polished 8 ° angle structure.

2.0x4.1 mm duplex patch cord cables are manufactured with ITU-T G657.A2 bend sensitive fibers, then assembled at both two ends with FC type connectors.

Specifications

  • Insertion Loss (IEC 61300-3-4-Method-B): ≤ 0.30 dB
  • Return Loss (IEC 61300-3-6-Method-B): ≥ 50 dB (UPC),≥60 dB (APC)
  • Durability: <0,1 dB typical change for >500 matings
  • Flammability: UL94 V-0
  • Operating Temperature: -40°C to +85°C
  • Connector End Face Geometry: IEC 61755-3
  • LC Connector Compliance: IEC 61754-20, TIA 604-10-A, RoHS
  • SC Connector Compliance: IEC 61754-4, TIA 604-3, RoHS
  • FC Connector Compliance: IEC 61754-13, TIA 604-4-A, RoHS
  • ST Connector Compliance: IEC 61754-2, TIA 604-2, RoHS
  • LSH Connector Compliance: IEC 61754 - 15, TIA 604 - 16, RoHS

SIMILAR PRODUCTS

LC/UPC-LC/UPC | 8 Fibers Universal Fanout | Multi Mode G651.OM4 | 4.8/1.8mm

MLU8FUFLU-MM4-4.8mm

REVIEW
SC/APC-LC/APC | Single Mode G657.A2 Corrugated Steel Breakout | 7.0x2.85mm

MLUCSBSAL-SM-7.0mm

REVIEW
PR5X-500-75 Polishing Pad (3pcs/set), 75 Shore, 127mm(5")

MLUPP-75

REVIEW
LC/UPC-LSH/APC | Single Mode G657.A2 Duplex Patch Cord | 2.0x4.1mm

MLUDPCLULSHA-SM

REVIEW
Special OffersREGISTER
Mikrolink Fiber | AÇIK HOLDING © 2022