LC/UPC-LC/UPC | Multi Mode G651.OM4 Corrugated Steel Breakout | 7.0x2.85mm

MLUCSBLU-MM4-7mm

Home Page Other Products Other LC/UPC-LC/UPC | Multi Mode G651.OM4 Corrugated Steel Breakout | 7.0x2.85mm

LC/UPC-LC/UPC | Multi Mode G651.OM4 Corrugated Steel Breakout | 7.0x2.85mm


This 7.0mmuniversal (indoor/outdoor) breakoutwith corrugated steelhas two multi-mode violet LC/UPC connectors on each side, and they are connected by two multi-mode OM4 fibers with 50µm core diameter and 125µm cladding diameter.

LC means "Lucent Connector" and it has 1.25mm diameter ceramic ferrule. The UPC ferrule of each side connector means its surface is straightly polished for ultra physical contact. Duplex means the cord has two fiber cables bonded together and that it can be used with Rx and Tx systems.

Specifications

  • Insertion Loss (IEC 61300-3-4-Method-B): ≤ 0.30 dB
  • Return Loss (IEC 61300-3-6-Method-B): ≥ 50 dB (UPC),60 dB (APC)
  • Durability: ≥ 1000 mating cycles
  • Flammability: UL94 V-0
  • Operating Temperature: -40°C to +85°C
  • Connector End Face Geometry: IEC 61755-3
  • LC Connector Compliance: IEC 61754-20, TIA 604-10-A, RoHS
  • SC Connector Compliance: IEC 61754-4, TIA 604-3, RoHS
  • FC Connector Compliance: IEC 61754-13, TIA 604-4-A, RoHS
  • ST Connector Compliance: IEC 61754-2, TIA 604-2, RoHS
  • E2000 Connector Compliance: IEC 61754 - 15, TIA 604 - 16, RoHS
Special OffersREGISTER
Mikrolink Fiber | AÇIK HOLDING © 2022