Multi-Functional Optical Power Meter | 4 in 1


Home Page Other Products Other Multi-Functional Optical Power Meter | 4 in 1

Multi-Functional Optical Power Meter | 4 in 1

MT-7602 test device can be used as an optical power meter, fiber optic visual fault locator, fiber cable tester and a flashlight.


Optical Power Meter

  • Wide range of power measurement from 850nm to 1625nm
  • Multiple mode:850nm/1300nm/
  • Single mode:1310nm/1490nm/1550nm/1625nm
  • Power measurements in dBm,mW and uM
  • Supports 2.5mm universal connectors (for ST/SC/FC)

visual fault locator

  • Easy to locate the breakpoint and bad connections in fiber optic cables
  • Supports 2.5mm universal connectors (for ST/SC/FC)
  • Both continuous and flashing modes available

Fiber Cable Tester

  • Pin to pin cable map indicator (1~8 LEDs)
  • Tests two types of connectors(RJ-11&RJ-45)
  • The maximum length measurement: 600M

LED Flash Light

  • Convenient for working in a dark environment
  • Features 2 modes for long illumination and SOS signal

Optical Power MeterDetector TypeInGaAs
Optical ConnectorST/SC/FC & 2.5mm Universal
Calibrated Wavelengths
  • Multiple mode:850nm/1300nm/
  • Single mode:1310nm/1490nm/1550nm/1625nm
Measurement Range+6 ~ -70 dBm
Frequency Identification270Hz, 1KHz, 2KHz
Accuracy± 0.2 dB
Power Measurement Linearity±0.1 dB
Display Resolution±0.01 dB
Power Display UnitsdBm、mW、μW
Visual Fault LocatorOutput power<1mW
Range3~5 kM @SM
ConnectorST/SC/FC & 2.5mm Universal
Laser safety ratingClass 2
Output modesContinuous (CW) 、2 Hz pulsed
Reverse battery protectionYes
Lan Cable TesterConnectorRJ45 & RJ11 shared
CableUTP LAN cable(8P8C)、Telecom cable(6P2C/6P4C/6P6C)
Measuring length Max.600 meter
Automatic Power Off10 min.(Can be cancelled)
Low Battery WarningLow battery energy
Battery Life100 hours (only OPM)
Power sourceAA/LR6 1.5V×2 pcs
Size125×52×34 mm
Special OffersREGISTER
Mikrolink Fiber | AÇIK HOLDING © 2022