SC/APC-LC/UPC | Single Mode G657.A2 Corrugated Steel Breakout | 7.0x2.85mm

MLUCSBSALU-SM-7.0mm

Home Page Other Products Other SC/APC-LC/UPC | Single Mode G657.A2 Corrugated Steel Breakout | 7.0x2.85mm

SC/APC-LC/UPC | Single Mode G657.A2 Corrugated Steel Breakout | 7.0x2.85mm


This 7.0mmuniversal (indoor/outdoor) breakout withcorrugated steelhas two green SC/APC connectors on one side and two blue LC/UPC connectors on the other, and they are connected by two single-mode A2 fibers with 9µm core diameter and 125µm cladding diameter.

SC means "Square Connector" and it has 2.5mm diameter ceramic ferrule. LC means "Lucent Connector" and it has 1.25mm diameter ceramic ferrule.The connector ferrule on one side isUPC,whichmeans its surface is ultra polished for ultra physical contact;and the other ferruleis APC, which means it is polished in an 8°angle for a high precision angled physical contact.Duplex means the cord has two fiber cables bonded together and that it can be used with Rx and Tx systems.

Specifications

  • Insertion Loss (IEC 61300-3-4-Method-B): ≤ 0.30 dB
  • Return Loss (IEC 61300-3-6-Method-B): ≥ 50 dB (UPC),60 dB (APC)
  • Durability: ≥ 1000 mating cycles
  • Flammability: UL94 V-0
  • Operating Temperature: -40°C to +85°C
  • Connector End Face Geometry: IEC 61755-3
  • LC Connector Compliance: IEC 61754-20, TIA 604-10-A, RoHS
  • SC Connector Compliance: IEC 61754-4, TIA 604-3, RoHS
  • FC Connector Compliance: IEC 61754-13, TIA 604-4-A, RoHS
  • ST Connector Compliance: IEC 61754-2, TIA 604-2, RoHS
  • E2000 Connector Compliance: IEC 61754 - 15, TIA 604 - 16, RoHS
Special OffersREGISTER
Mikrolink Fiber | AÇIK HOLDING © 2022