SC/UPC-SC/UPC | Multi Mode G651.OM1 Duplex Patch Cord | 2.0x4.1mm

MLUDPCSU-MM1

Home Page Other Products Other SC/UPC-SC/UPC | Multi Mode G651.OM1 Duplex Patch Cord | 2.0x4.1mm

SC/UPC-SC/UPC | Multi Mode G651.OM1 Duplex Patch Cord | 2.0x4.1mm


SC (Square Connector) type connectors have 2.5 mm diameter ferule structure. The abbreviations PC, UPC and APC are definitions expressing the physical differences of the surface geometries of the connectors on the ceramic ferrules. UPC (Ultra Physical Contact) indicates that the ceramic ferule structure on the connector has an extra polished flat structure; APC (Angled Physical Contact) indicates that the ceramic ferrule structure on the connector has an extra polished 8 ° angle structure.

2.0x4.1 duplex patch cord cables are manufactured with ITU-T G651.OM1 bend sensitive fibers, then assembled at both two ends with SC type connectors.

Specifications

  • Insertion Loss (IEC 61300-3-4-Method-B): ≤ 0.30 dB
  • Return Loss (IEC 61300-3-6-Method-B): ≥ 35 dB (UPC)
  • Durability: <0,1 dB typical change for >500 matings
  • Flammability: UL94 V-0
  • Operating Temperature: -40°C to +85°C
  • Connector End Face Geometry: IEC 61755-3
  • LC Connector Compliance: IEC 61754-20, TIA 604-10-A, RoHS
  • SC Connector Compliance: IEC 61754-4, TIA 604-3, RoHS
  • FC Connector Compliance: IEC 61754-13, TIA 604-4-A, RoHS
  • ST Connector Compliance: IEC 61754-2, TIA 604-2, RoHS
  • LSH Connector Compliance: IEC 61754 - 15, TIA 604 - 16, RoHS
Special OffersREGISTER
Mikrolink Fiber | AÇIK HOLDING © 2022